Відео

Wow great job 👍🏼 i am trying to acheive similar doir with Zenwood acoustics slat panels. I just cant find a way to install the sugatsune hinge properly. To avoid the door slats crushing the wall ones i would have to keep a 3/4" gap between the 2. Any idea of what am i doing wrong ?

So the machine is basically crap? Two more years since you made this video, what are your thoughts now? What I take from your video is that the bolts unscrew themselves, the ceramic bearings are shit, the saw vibrates and the wheel base is useless? You said "those are the things I love about this machine" but what are those things exactly?

A European customer would not accept this quality. You Americans nailed everything, you paste it, and then paint it on the spot. You also greased the door so that the projection hinge is already on it. I'm sorry, but that's undemanding. In Europe, we plan everything in advance. We calculate the size of the components in advance, then manufacture them and glue the cabinets together with foreign pins. Maybe this furniture looks good on video, and many people don't even know what I'm talking about. Unfortunately, there are many such UA-camrs.

How do you find oak that doesn’t look all grainy and ugly? Your lumber looks so smooth and straight with even lines going in even directions??

My planer doesn't have at outfeed table or rollers. do you think the bracket would be able to mount directly to the planer bed?

Love the hidden door idea! How possible is it to add a lock?

Gorgeous!

How do you get finished goods move from the assembly area to the door?

Hello, Congratulations Cool👍👏👏👏👏

Great video! At 28:47 (or close) you show the final wall with what appears to be a large AV receiver. One of my current challenges is finding a media cabinet that is deep enough to not only hold the AV receiver, but also has enough depth for the cables that come straight out the back. My AV receiver (Yamaha Aventage A8A is huge!). needs approximately 18" just for the amp, and another 2" for the cables. How did you manage to push your amp all the way back to the back of your media wall?

Looks amazing

A GIANT long Piano Hinge... think of ALL the storage additional capacity ! (and easy to clean out the downdraft)

speaking of door, how about replacing those 80's kitchen cabinet doors?

Amazing work. New Subscriber!

Super amazing work man.

IKEA clickbait for views. ..and then you have the audacity to put in religious items in the build after being deceitful. Same on you!

I hate a TV in stupid place

I always wanted the same but with fish tanks instead of arches

its a nice result except for the dead man on a crucifix... that is just straight up creepy.

Wow! Beautiful work! Silly question, if the application was modified, could this be renter friendly?

Why is it expected of architects to not sleep, eat enough and have unorganized lives, being slaves of their profession? It's so counter productive and unnecessarily inhumaine. Also, newer buildings and contemporary architecture is uniform, boring, unnatural and inhumaine...like the working hours. Maybe if the way architects worked changed, the buildings would change as well. Maybe the designs are a reflection of the designers. Also architects usually don't think about the environment of the building (and I don't mean other buildings and artificial objects). Designing the greenery around the buildings should be 50% of the work. Big cities are degenerating people in their current state, it should change.

🎉

Awesome! Can you do a video showing using this method to replace bifold closet doors? I’m getting ready to start that project.

Beautiful job, amazing table👍🏼

Made In Indonesia...nice built...

Hi from Indo. Did you use the stainless or cold roll steel bracket?

What grit sand paper did you use on the vineer?

Tiene un vídeo como lo hiciste

San mo po naorder yung hinges?

Cool video, thx. Like the unagitated narration

Looks great. where is the paneling from that you used on the back of the middle section?

I love it.

How do you lock the door from the inside?

I have to admit, it was painful to watch those big, beautiful built-in book cases get sealed up forever. I almost clicked, "NEXT!". LOL Think of the possibilities! Safe/hiding space? Adult beverage bar? Gun safe space? Kid's toy storage? Pre-company clean up dump space? Emergency supplies? Zombie apocalypse Prep kits? Christmas present hiding spot? Years and years from now, someone is going to discover those walled up bookcases and scratch their head, for a very long time. I would &@$%# to have those spaces. Anyway, nice build. Beautiful result. I would add lighting behind the TV, the shelf under the TV, and under the cabinet kick plate to balance the lighting effects. 🤞🏽♥️😃🙏🏼 Don't Let Then Divide Us

hmmm.. Nothing against the arches but they don't match the rest of the media center or the decor / furniture. It would look much nicer without them. The TV is too high and too small.

Hi, just came across this video now. How are the slats held to the plywood?

beautiful work brother. God bless!

How do stop the slats binding at the hinges

Thanks you for explain so well how to make this! Follow you from Chile, regards 🤘

Could've just used benderboard for the arches. Now ya just need a bigger TV. Lol

Ok... of all the review vids on the BX14, I'll leave my comment on this video. Just finished setting mine up, 220V version, and performing test cuts. Wow! Fantastic bandsaw. I cut a paper thin veneer, silky smooth finish, and fast like butter pushing through my 7" wide test piece of poplar (Resaw King 3/4" blade). Dunno why you'd replace the ceramic guides. As for the tension indicator, yeah, it's kinda hack-job, but it (a magnet) is effective when properly placed as per instructions.

Great job ! looks amazing! What are the dimensions of the wooden slats? Also, what would be the total thickness if I'm triyng to make this from scratch as a partition wall not attach on an existing wall?

Super curious about your choice of paint. SW Ceiling bright white. Never heard of using this for a nice finish on cabinets/wood furniture. Would you be willing to give your thoughts on this? Thank you!

When you wanted to offset the arches 1.5 inches from the front of the face frame, Can you just set the extrusion "to object" and use the construction plane as the object?

The to point option is no longer there. In this case I can extrude to object and pick the face of the base but what if you need to extend to a point? Say on a bodie with a 45 chamfer and the cabinets needed to be linked to the inside edge of the chamfer?

Thank you for the video. Whats your process for getting cut lists and material estimates our for Shapr?

Great video, nice to see how other woodworkers handle sketches vs. bodies.

You're not supposed to say it's your first and last if you've had drill presses before. 🤪

That is so cool 💪🏻 It’s really nice, wow !!

Can you give me some type of link to buy the correct hinge please